Flow Meter Calibration Flowhire offers competitively priced in-house traceable flow meter calibration for meter sizes 1mm in diameter up to 200mm diameter. Our maximum flow rate capability is approximately 4,000 litres per minute and we have a minimum capacity of just 1 litre per hour.All of Flowhire’s reference flow meters and weigh scales are calibrated annually and are traceable to independent UKAS calibration laboratories. Throughout the year Flowhire’s calibration technicians carry out periodic verification of the master reference devices by cross checking and recording results from each device.The majority of calibrations are carried out using cool clean water although we can calibrate using light oils or Diesel fuel on special request. All pipework and tanks are manufactured from stainless steel and the water is filtered and screened to ensure no debris can enter the system. If required our calibration facility can be hired out for witness calibration or OEM product testing.Typical turnaround time for flow meter calibration is two to three days; we also offer a same day turnaround and a ‘while you wait’ service at extra cost. Types of calibration include five points with two repeats as standard and ten points with electronic linearisation on request.Any manufacturers’ flow meters can be accommodated in our flow rigs and we can quickly and easily connect with flanged, screwed or wafer process connections.All meters returned for calibration must be certified clean and be accompanied with a completed COSHH certificate. The uncertainty of measurement in our calibration processes is estimated to be 0.3%For more information on Flowhire’s flow meter calibration service, contact us 01422 829930 or email us at firstname.lastname@example.org.